コメントをみる

Python Slots Property

2021年1月13日

Download: http://gg.gg/nu1sc
Just for completeness of my notes, note that there is a one-time cost per slot in the class’s namespace of 64 bytes in Python 2, and 72 bytes in Python 3, because slots use data descriptors like properties. We mentioned in the beginning that slots are preventing a waste of space with objects. Since Python 3.3 this advantage is not as impressive any more. With Python 3.3 Key-Sharing Dictionaries are used for the storage of objects. In Python, property is a built-in function that creates and returns a property object. The syntax of this function is: property (fget=None, fset=None, fdel=None, doc=None). If there is demand for cachedpropertywithslots, it can be added separately. Msg280597 - Author: Nick Coghlan (ncoghlan). inability to run the method through a debugger If you `s` in the Python debugger on a line where a property or cached property is accessed, you will step into the decorated method.Python老鸟都应该看过那篇非常有吸引力的 Saving 9 GB of RAM with Python’s __slots__ 文章，作者使用了__slots__让内存占用从25.5GB降到了16.2GB。在当时来说，这相当于用一个非常简单的方式就降低了30%的内存使用，着实惊人。作者并没有提到他的业务特点和代码，那我们就基于《fluent python》中的例子来验证下是不是有这么厉害：
我们分别跑一下这2个类：
2种方法初始内存略有差别，但是由于这个差别和总内存量相比太小而忽略不计，结论就是：使用slots可以让内存使用减少3.5倍！！# 通过 (200 - 4) / ((60 - 4) * 1.0) 计算得来
那么用slot就是非非常那个有必要吗？事实上500000个实例这种机会非常少见，用不用完全根据业务来决定，并不要以偏概全。因为（敲黑板了哈）使用__slots__也是有副作用的：
第三点有点难理解，我写个例子看看吧：
所以实例不超过万级别的类，__slots__是不太值得使用的。
PS:《fluent python》比我狠，说的是小于百万级别实例不值得使用。
无耻的广告：《Python Web开发实战》上市了！Slot Machine In Python
欢迎关注本人的微信公众号获取更多Python相关的内容（也可以直接搜索「Python之美」）：
Section author: e8johan
Note
Last Build: December 07, 2020 at 10:50 CET
The source code for this chapter can be found in the assets folder.
This chapter describes the PySide2 module from the Qt for Python project. You will learn how to install it and how to leverage QML together with Python.20.1. Introduction¶
The Qt for Python project provides the tooling to bind C++ and Qt to Python, and a complete Python API to Qt. This means that everything that you can do with Qt and C++, you can also do with Qt and Python. This ranges from headless services to widget based user interfaces. In this chapter, we will focus on how to integrate QML and Python.
Currently, Qt for Python is available for all desktop platforms, but not for mobile. Depending on which platform you use, the setup of Python is slightly different, but as soon as you have a Python and PyPA environment setup, you can install Qt for Python using pip. This is discussed in more detail further down.
As the Qt for Python project provides an entirely new language binding for Qt, it also comes with a new set of documentation. The following resources are good to know about when exploring this module.
*Reference documentation: https://doc.qt.io/qtforpython/
*Qt for Python wiki: https://wiki.qt.io/Qt_for_Python
*Caveats: https://wiki.qt.io/Qt_for_Python/Considerations
The Qt for Python bindings are generated using the Shiboken tool. At times, it might be of interest to read about it as well to understand what is going on. The prefered point for finding information about Shiboken is the reference documentation. If you want to mix your own C++ code with Python and QML, Shiboken is the tool that you need.
Note
Through-out this chapter we will use Python 3.6.20.2. Installing¶
Qt for Python is available through PyPA using pip under the name pyside2. In the example below we setup a venv environment in which we will install the latest version of Qt for Python:
When the environment is setup, we continue to install pyside2 using pip:
After the installation, we can test it by running a Hello World example from the interactive Python prompt:
The example results in a window such as the one shown below. To end the program, close the window.
A Qt Widgets based Hello World example using Qt for Python.20.3. Building an Application¶
In this chapter we will look at how you can combine Python and QML. The most natural way to combine the two worlds is to do as with C++ and QML, i.e. implement the logic in Python and the presentation in QML.
To do this, we need to understand how to combine QML and Python into a single program, and then how to implement interfaces between the two worlds. In the sub-sections below, we will look at how this is done. We will start simple and progress to an example exposing the capabilities of a Python module to QML through a Qt item model.20.3.1. Running QML from Python¶
The very first step is to create a Python program that can host the Hello World QML program shown below.
To do this, we need a Qt mainloop provided by QGuiApplication from the QtGui module. We also need a QQmlApplicationEngine from the QtQml module. In order to pass the reference to the source file to the QML application engine, we also need the QUrl class from the QtCore module.
In the code below we emulate the functionality of the boilerplate C++ code generated by Qt Creator for QML projects. It instanciates the application object, and creates a QML application engine. It then loads the QML and then ensures that the QML was loaded by checking if a root object was created. Finally, it exits and returns the value returned by the exec_ method of the application object.
Note
The exec_ method ends with an underscore to avoid a name clash with Python. It corresponds to the C++ method named exec.
Executing the example results in a window with the title Hello Python World.
A QML window created from Python.
Note
The example assumes that it is executed from the directory containing the main.qml source file. You can termine the location of the Python file being executed using the __file__ variable. This can be used to locate the QML files relative to the Python file as shown in this blog post.20.3.2. Exposing Python Objects to QML¶
The easiest way to share information between Python and QML is to expose a Python object to QML. This is done by registering a context property through the QQmlApplicationEngine. Before we can do that, we need to define a class so that we have an object to expose.
Qt classes comes with a number of features that we want to be able to use. These are: signals, slots and properties. In this first example, we will restrict ourselves to a pair of a basic signal and slot. The rest will be covered in the examples further on.20.3.2.1. Signals and Slots¶
We start with the class NumberGenerator. It has a constructor, a method called giveNumber and a signal called nextNumber. The idea is that when you call giveNumber, the signal nextNumber is emitted with a new random number. You can see the code for the class below, but first we will look at the details.
First of all we make sure to call QObject.__init__ from our constructor. This is very important, as the example will not work without it.
Then we declare a signal by creating an instance of the Signal class from the PySide2.QtCore module. In this case, the signal carries an integer value, hence the int.
Finally, we decorate the giveNumber method with the @Slot() decorator, thus turning it into a slot. There is not concept of invokables in Qt for Python, so all callable methods must be slots.
In the giveNumber method we emit the nextNumber signal using the emit method. This is a bit different than the syntax for doing so from QML or C++ as the signal is represented by an object instead of being a callable function.
Next up is to combine the class we just created with the boilerplate code for combining QML and Python from earlier. This gives us the following entry-point code.
The interesting lines are the one where we first instatiate a NumberGenerator. This object is then exposed to QML using the setContextProperty method of the rootContext of the QML engine. This exposes the object to QML as a global variable under the name numberGenerator.
Continuing to the QML code, we can see that we’ve created a Qt Quick Controls 2 user interface consisting of a Button and a Label. In the button’s onClicked handler, the numberGenerator.giveNumber() function is called. This is the slot of the object instantiated on the Python side.
To receive a signal from an object that has been instantiated outside of QML we need to use a Connections element. This allows us to attach a signal hanlder to an existing target.
Note
At the moment of writing, the name of a signal argument cannot be propagated from Python to QML. To work around this, the Python signal, numberGenerator.nextNumber, is connected to a QML defined signal, reNextNumber, that has the name number for the signal argument. This allows us to capture the value of the signal argument in the signal handler in the Connections element.
This is a workaround for issue PYSIDE-634.20.3.2.2. Properties¶
Instead of relying soley on signals and slots, the common way to expose state to QML is through properties. A property is a combination of a setter, getter and notification signal. The setter is optional, as we can also have read-only properties.
To try this out we will update the NumberGenerator from the last example to a property based version. It will have two properties: number, a read-only property holding the last random number, and maxNumber, a read-write property holding the maximum value that can be returned. It will also have a slot, updateNumber that updates the random number.
Before we dive into the details of properties, we create a basic Python class for this. It consists of the relevant getters and setters, but not Qt signalling. As a matter of fact, the only Qt part here is the inheritance from QObject. Even the names of the methods are Python style, i.e. using underscores instead of camelCase.
Take notice of the underscores (“__”) at the beginning of the __set_number method. This implies that it is a private method. So even when the number property is read-only, we provide a setter. We just don’t make it public. This allows us to take actions when changing the value (e.g. emitting the notification signal).
In order to define properties, we need to import the concepts of Signal, Slot, and Property from PySide2.QtCore. In the full example, there are more imports, but these are the ones relevant to the properties.
Now we are ready to define the first property, number. We start off by declaring the signal numberChanged, which we then invoke in the __set_number method so that the signal is emitted when the value is changed.
After that, all that is left is to instantiate the Property object. The Property contructor takes three arguments in this case: the type (int), the getter (get_number) and the notification signal which is passed as a named argument (notify=numberChanged). Notice that the getter has a Python name, i.e. using underscore rather than camelCase, as it is used to read the value from Python. For QML, the property name, number, is used.
This leads us to the next property, maxNumber. This is a read-write property, so we need to provide a setter, as well as everything that we did for the number property.
First up we declare the maxNumberChanged signal. This time, using the @Signal decorator instead of instantiating a Signal object. We also provide a setter slot, setMaxNumber with a Qt name (camelCase) that simply calls the Python method set_max_number alongside a getter with a Python name. Again, the setter emits the change signal when the value is updated.
Finally we put the pieces together into a read-write property by instantiating a Property object taking the type, getter, setter and notification signal as arguments.
Now we have properties for the current random number, number, and the maximum random number, maxNumber. All that is left is a slot to produce a new random number. It is called updateNumber and simply sets a new random number.
Finally, the number generator is exposed to QML through a root context property.
In QML, we can bind to the number as well as the maxNumber properties of the numberGenerator object. In the onClicked handler of the Button we call the updateNumber method to generate a new random number and in the onValueChanged handler of the Slider we set the maxNumber property using the setMaxNumber method. This is because altering the property directly through Javascript would destroy the bindings to the property. By using the setter method explicitly, this is avoided.20.3.3. Exposing a Python class to QML¶Class Property Python
Up until now, we’ve instantiated an object Python and used the setContextProperty method of the rootContext to make it available to QML. Being able to instantiate the object from QML allows better control over object life-cycles from QML. To enable this, we need to expose the class, instead of the object, to QML.
The class that is being exposed to QML is not affected by where it is intantiated. No change is needed to the class definition. However, instead of calling setContextProperty, the qmlRegisterType function is used. This function comes from the PySide2.QtQml module and takes five arguments:
*A reference to the class, NumberGenerator in the example below.
*A module name, ’Generators’.
*A module version consisting of a major and minor number, 1 and 0 meaning 1.0.
*The QML name of the class, ’NumberGenerator’
In QML, we need to import the module, e.g. Generators1.0 and then instantiate the class as NumberGenerator{...}. The instance now works like any other QML element.20.3.4. A Model from Python¶
One of the more interesting types of objects or classes to expose from Python to QML are item models. These are used with various views or the Repeater element to dynamically build a user interface from the model contents.
In this section we will take an existing python utility for monitoring CPU load (and more), psutil, and expose it to QML via a custom made item model called CpuLoadModel. You can see the program in action below:
Showing the CPU load of eight cores through a custom item model using psutil.
Note
The psutil library can be found at https://pypi.org/project/psutil/ .
“psutil (process and system utilities) is a cross-platform library for retrieving information on running processes and system utilization (CPU, memory, disks, network, sensors) in Python.”
You can install psutil using pipinstallpsutil.
We will use the psutil.cpu_percent function (documentation) to sample the CPU load per core every second. To drive the sampling we use a QTimer. All of this is exposed through the CpuLoadModel which is a QAbstractListModel.
Item models are interesting. They allow you to represent a two dimensional data set, or even nested data sets, if using the QAbstractItemModel. The QAbstractListModel that we use allow us to represent a list of items, so a one dimensional set of data. It is possible to implement a nested set of lists, creating a tree, but we only create one level.
To implement a QAbstractListModel it is necessary to implement the methods rowCount and data. The rowCount returns the number of CPU cores which we get using the psutil.cpu_count method. The data method returns data for different roles. We only support the Qt.DisplayRole, which corresponds to what you get when you refer to display inside the deletage item from QML.
Looking at the code for the model, you can see that the actual data is stored in the __cpu_load list. If a valid request is made to data, i.e. the row, column and role is correct, we return the right element from the __cpu_load list. Otherwise we return None which corresponds to an uninitialized QVariant on the Qt side.
Every time the update timer (__update_timer) times out, the __update method is triggered. Here, the __cpu_load list is updated, but we also emit the dataChanged signal, indicating that all data was changed. We do not do a modelReset as that also implies that the number of items might have changed.
Finally, the CpuLoadModel is exposed to QML are a registered type in the PsUtils module.
On the QML side we use a ListView to show the CPU load. The model is bound to the model property. For each item in the model a delegate item will be instantiated. In this case that means a Rectangle with a green bar (another Rectangle) and a Text element displaying the current load.20.4. Limitations¶
At the moment, there are some things that are not easily available. One of them is that you cannot easily create QML plugins using Python. Instead you need to import the Python QML “modules” into your Python program and then use qmlRegisterType to make it possible to import them from QML.20.5. Summary¶
In this chapter we have looked at the PySide2 module from the Qt for Python project. After a brief look at installation, we focused on how Qt concepts are used from Python. This included slots, signals and properties. We also looked at a basic list model and how to expose both Python objects and classes from Python to QML.
Download: http://gg.gg/nu1sc https://diarynote.indered.space

コメントをみる

Lenovo Thinkpad T450 Slots

2021年1月13日

Download: http://gg.gg/nu1qa
With a screwdriver and camera, we will review and upgrade this laptop, just to give you all the information you need!How to clone HDD to smaller SSD?https://. Lenovo ThinkPad T450 - 14’ - Core i7 5600U - 8 GB RAM - 256 GB SSD - US Specs Lenovo ThinkPad T450 - 14’ - Core i7 5600U - 8 GB RAM - 256 GB SSD - US 20BV0006US.
*Lenovo Thinkpad T450 Ssd Upgrade
*Lenovo Thinkpad T450 BiosLenovo Thinkpad T450 Ssd UpgradeLenovo Thinkpad T450 Bios
*Comparison Criteria
*Summary
*multimedia
*performance
*memory
*display details
*peripherals
*general information
*networking
*storage
*battery
*ports
*othersXLenovo T450 (20BV0002US)XLenovo ThinkPad T14 Intel Core i5 10th Gen 14-inch Full HD Laptop (16GB RAM/ 512GB SSD/ Windows 10 Pro/ Black/ 1.55 kg), 20S0S0AL00XSummary storage500 GB HDD-processorIntel Core i5 (5th Gen) Processor10th Gen Intel Core i5-10210Udisplay14’ (35.56 cm) display, 1600 x 900 px14 Inchram8 GB DDR3 RAM16 GBsecondary camrearfacingmicrophone typeDual Microphones-inbuilt microphonesound technologiesRealtek ALC3232-webcamaudio solutionHD Audio Solution-speakersStereo SpeakersDual Speakersvideo recording720p HD-performanceclockspeed2.3 Ghz-processorIntel Core i5-5300U (5th Gen)10th Gen Intel Core i5-10210Ugraphic processorIntel HD 5500Integratedram typeDDR3DDR4memory layout1 x 8 Gigabyte1x16 Gigabytememory slots11ram speed1600 Mhz-expandable memory16 GB-capacity8 GB16 GBdisplay detailsdisplay typeLEDLEDdisplay size14 Inches (35.56 cm)14 Inchdisplay resolution1600 x 900 Pixels1920 x 1200 Pixelsdisplay touchscreendisplay featuresHD LED Backlit DisplayFull HD LED Backlit Anti-Glare DisplaykeyboardStandard Notebook KeyboardStandard Notebook Keyboardpointing deviceTouchpad with Multi-touch Gesture supportTouchpad with Multi-Touch Gestures Enabledfingerprint scanneroptical drivegeneral informationdimensionswxhxd337.82 x 233.68 x 20.3 mm-operating system type64-bit64-bitweight1.72 Kg1.55 Kgoperating systemWindows 7 Professional-modelT450 (20BV0002US)20S0S0AL00brandLenovoLenovocolorsBlackBlackwireless lan802.11 a/b/g/n/ac802.11 a/b/g/n/acbluetoothbluetooth version4.05storagehdd speedrpm5400 RPM-ssd capacity16 GB-hdd capacity500 GB-hdd typeSATA-power supply23 W AC Adapter W-battery cell3 Cell4 cellbattery typeLi-IonLi-Ionportssd card readervga port-usb 30 slots32microphone jackheadphone jacksales packageLaptop, Battery, AC Adapter, User GuideLaptop, Battery, AC Adapter, User Guidewarranty1 Year1 Yearlockport-More DetailsPrice₹ 159,199₹ 119,990DetailsFull Details »Full Details »
Download: http://gg.gg/nu1qa https://diarynote.indered.space

コメントをみる

Casino Bozen Italien

Little River Gambling

Graton Casino Recent Slot Winners

Craps Table Layout Explained

Sugarhouse Casino Philadelphia Poker Room

888 Poker Hud Free

Virgin Casino Online Slots

Treasure Bay Casino Before Hurricane Katrina

Vacanze Formula Roulette Italia

Casino Reykjavik

Wind Creek Casino Allentown Pa

Gold Strike Casino Chips

Download Cleopatra Slot Machine Free

Hard Rock Casino Tulsa Promotions

Thinkpad X230 Slots

Python Slots Property

Lenovo Thinkpad T450 Slots

最新の日記一覧

お気に入り日記の更新

お気に入り日記

テーマ別日記一覧

この日記について

日記内を検索

<<　 2025年7月　 >>
日	月	火	水	木	金	土
29	30	1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	31	1	2

最新の日記 一覧

お気に入り日記の更新

お気に入り日記

テーマ別日記一覧

この日記について

日記内を検索

最新の日記一覧